60mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 5)
60mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 5)
- Product Code: A1-4609
- Delivery Time: 1-3 working days
- Brand: Xtratherm (Tech. support: 03712221055)
- Model and Size: 2400x1200mm - 14.4m2
- Weight: 27.65kg
Our ratings on 16-12-2024:
4.8 out of 5
60mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 5)
Width: 1200mm
Length: 2400mm
Pack Coverage: 14.4m2
Pack Quantity: 5
Density: 32kg/m3
Weight/m2: 1.92kg
Weight: 27.65kg
Thermal Conductivity: 0.022W/mK
R-Value: 2.27m2K/W
Compressive Strength: 150kPa
60mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Suitable for use below single ply mechanically fixed roof membranes.
Note: not suitable for applications with built-up bitumen based roofing or mastic asphalt systems.
APPLICATION
- Flat roof below single ply mechanically fixed roof membranes
CHARACTERISTICS
- Superior performance PIR foam core,
- Vapour-tight aluminium facings on both sides,
- Effective thermal,
- Contributes to limit the risk of condensation,
- Will have life as long as the roof waterproof covering,
- For new build or refurbishment,
- Rot proof and will remain effective for the life span of the building,
- Can be readily cut using a sharp knife or fine toothed saw
CERTIFICATION
Xtratherm_Flat_Roofing_guide.pdf
Guide Price
Brand: Xtratherm
Model and Size: 1200x600mm - 4.32m2
Delivery Time: 3 - 5 days
80mm Xtratherm FR-BGM is a PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. FR-BGM is suitable to apply torch on felt directly on the insulation. FR-BGM can also be used in mecha..
Guide Price: £90.18
£108.22 inc VAT
Guide Price
Brand: Xtratherm
Model and Size: 1200x600mm - 5.04m2
Delivery Time: 3 - 5 days
Xtratherm FR-MG 70mm is a mineral coated glass faced board. Xtratherm XT/FR MG boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the direction of the substrate and all edges must be fully supported by the dec..
Guide Price: £87.94
£105.53 inc VAT
Guide Price
Brand: Xtratherm
Model and Size: 1200x2400mm - 2.88m2
Delivery Time: 1-3 working days
92.5mm Xtratherm XT/TL Thermal Liner Dot and Dab (80mm PIR Insulation bonded to 12.5mm Plasterboard)
92.5mm Xtratherm XT/TL Thermal Liner Dot and Dab Insulated Plasterboard is a high performance rigid insulation board made from 15mm Xtratherm PIR core faced with composite kraft paper bonded to 12.5mm plasterboard, specially designed for internal walls dry lining and insulation, due to its closed ce..
Guide Price: £99.65
£119.58 inc VAT
Guide Price
Brand: Xtratherm
Model and Size: 1200x600mm - 3.6m2
Delivery Time: 3 - 5 days
Xtratherm FR-MG 100mm is a mineral coated glass faced board. Xtratherm XT/FR MG boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the direction of the substrate and all edges must be fully supported by the de..
Guide Price: £85.34
£102.41 inc VAT
Guide Price
Brand: Xtratherm
Model and Size: 2400mm x 1200mm - 2.88m2
Delivery Time: 1-3 working days
15mm Xtratherm Thin-r is a foil faced Polyisocyanurate (PIR) insulation board formed by a blowing process which generates rigid foam composed of fine cells filled with Pentane blowing agent trapped within the foam. Pentane has very good insulating properties and gives Thin-r superb insulating capabi..
Guide Price: £22.10
£26.52 inc VAT
Guide Price
Brand: Xtratherm
Model and Size: 1200x2400 - 2.88m2
Delivery Time: 1-3 working days
59.5mm Xtratherm Thin-R Thermal Liner XT/TL-MF, this innovative composite insulated panel combines a 50mm Xtratherm Polyiso (PIR) core with foil faces, bonded to 9.5mm tapered edge plasterboard for secure mechanical fixing to internal walls. Ideal for use in new build and refurbishment projects, XT/..
Guide Price: £63.56
£76.27 inc VAT