120mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 3)
120mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 3)
- Product Code: A1-4623
- Delivery Time: 1-3 working days
- Brand: Xtratherm (Tech. support: 03712221055)
- Model: 2400x1200mm - 8.64m2
- Weight: 33.18kg
Our ratings on 16-12-2024:
4.8 out of 5
120mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 3)
Width: 1200mm
Length: 2400mm
Pack Coverage: 8.64m2
Pack Quantity: 3
Density: 32kg/m3
Weight/m2: 3.84kg
Weight: 33.18kg
Thermal Conductivity: 0.022W/mK
R-Value: 5.45m2K/W
Compressive Strength: 150kPa
120mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Suitable for use below single ply mechanically fixed roof membranes.
Note: not suitable for applications with built-up bitumen based roofing or mastic asphalt systems.
APPLICATION
- Flat roof below single ply mechanically fixed roof membranes
CHARACTERISTICS
- Superior performance PIR foam core,
- Vapour-tight aluminium facings on both sides,
- Effective thermal,
- Contributes to limit the risk of condensation,
- Will have life as long as the roof waterproof covering,
- For new build or refurbishment,
- Rot proof and will remain effective for the life span of the building,
- Can be readily cut using a sharp knife or fine toothed saw
CERTIFICATION
Xtratherm_flat_roofing_FR_ALU_Datasheet.pdf
Guide Price
Brand: Xtratherm
Model: Thin-R - 2400 x 1200 - 2.88m2
Delivery Time: 1-3 working days
165mm Xtratherm Thin-r is a foil faced Polyisocyanurate (PIR) insulation board formed by a blowing process which generates rigid foam composed of fine cells filled with Pentane blowing agent trapped within the foam. Pentane has very good insulating properties and gives Thin-r superb insulating capab..
Guide Price: £67.88
£81.46 inc VAT
Guide Price
Brand: Xtratherm
Model: 1200x600mm - 4.32m2
Delivery Time: 3 - 5 days
80mm Xtratherm FR-BGM is a PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. FR-BGM is suitable to apply torch on felt directly on the insulation. FR-BGM can also be used in mecha..
Guide Price: £90.18
£108.22 inc VAT
Guide Price
Brand: Xtratherm
Model: CT/PIR 1200x450mm - 2.16m2
Delivery Time: 1-3 working days
150mm Xtratherm CavityTherm wall insulation board is a high performance composite board of enhanced PIR core with a lambda value of 0.021W/mK. The boards have gas tight facings with one face bonded to a profiled HIPS skin during manufacture to provide a drainage plane. CavityTherms unique engin..
Guide Price: £136.84
£164.21 inc VAT
Guide Price
Brand: Xtratherm
Model: 1200x600mm - 2.16m2
Delivery Time: 1 - 2 days
Xtratherm FR-MG 150mm is a mineral coated glass faced board. Xtratherm XT/FR MG boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the direction of the substrate and all edges must be fully supported by the de..
Guide Price: £83.97
£100.76 inc VAT
Guide Price
Brand: Xtratherm
Model: 2400x1200 - 2.88m2
Delivery Time: 1-3 working days
Xtratherm Plydeck is a composite insulated panel consisting of an 110mm Xtratherm Polyisocyanurate core with a composite foil face, bonded to 9mm OSB board. This advanced panel offers both thermal insulation and decking capabilities in a single application.
Application
Xtratherm Plydec..
Guide Price: £65.54
£78.65 inc VAT
Brand: Xtratherm
Model: 1200x2400mm - 28.80m2
Delivery Time: 1-3 working days
30mm XtroLiner XO/PR board has a core of modified polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings. It offers excellent insulation performance with thermal conductivity of 0.021 W/mK and a Class ‘O’ fire rating. XtroLiner XO/PR is CFC & HCFC free and is manufa..