60mm Xtratherm Safe-R SR/CW Phenolic Partial Fill Cavity Insulation Board (pack of 5)
60mm Xtratherm Safe-R SR/CW Phenolic Partial Fill Cavity Insulation Board (pack of 5)
- Product Code: A1-4577
- Delivery Time: 2 - 3 working days
- Brand: Xtratherm (Tech. support: 03712221055)
- Model: 1200x450mm - 2.7m2
- Weight: 7.29kg
Our ratings on 16-12-2024:
4.8 out of 5
60mm Xtratherm Safe-R SR/CW Phenolic Partial Fill Cavity Insulation Board (pack of 5)
Width: 450mm
Length: 1200mm
Pack Coverage: 2.7m2
Pack Quantity: 5
Density: 45kg/m3
Weight/m2: 2.7kg
Weight: 7.29kg
Thermal Conductivity: 0.020W/mK
R-Value: 3m2K/W
Compressive Strength: 125kPa
Fire Rating (Reaction to Fire): B(Class 0)
60mm Xtratherm Safe-R SR/CW Phenolic foam board is a superior performance rigid partial fill cavity insulation board with enhanced fire performance, consisting of a Class O phenolic foam core with negligible smoke obscuration. Safe-R SR/CW is faced with low emissivity aluminium facings both sides, and has a thermal conductivity as low as 0.02W/mK.
APPLICATION
- Designed for use for partial fill cavity insulation
CHARACTERISTICS
- Superior performance phenolic foam,
- Provides the most efficient U-values with minimal thickness,
- Effective thermal and fire performance,
- Low smoke obscuration,
- Low risk fire rating - Class 0,
- For new build or refurbishment,
- Rot proof and will remain effective for the life span of the building,
- Can be readily cut using a sharp knife or fine toothed saw.
CERTIFICATION
- Manufactured under a quality system approved to EN ISO 9001:2000 (Quality Management Systems)
- Manufactured under an environmental system approved to EN ISO 14001:2004 (Environmental Management Systems)
- Is manufactured without the use of CFC's or HCFC's and has Zero Ozone Depletion Potential
- BBA approved
Xtratherm_SafeR_SRCW_Datasheet.pdf
Guide Price
Brand: Xtratherm
Model: 1200x600mm - 4.32m2
Delivery Time: 3 - 5 days
80mm Xtratherm FR-BGM is a PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. FR-BGM is suitable to apply torch on felt directly on the insulation. FR-BGM can also be used in mecha..
Guide Price: £90.18
£108.22 inc VAT
Guide Price
Brand: Xtratherm
Model: 1200x2400 - 2.88m2
Delivery Time: 1-3 working days
67.5mm Xtratherm Thin-R Thermal Liner XT/TL-MF is a composite insulated panel of 55mm Xtratherm Polyiso (PIR) core with foil faces bonded to 12.5mm tapered edge plasterboard for mechanically fixing to internal walls. XT/TL-MF is designed to provide high levels of thermal insulation and dry lining in..
Guide Price: £71.86
£86.23 inc VAT
Guide Price
Brand: Xtratherm
Model: 1200x600mm - 3.6m2
Delivery Time: 3 - 5 days
Xtratherm FR-MG 100mm is a mineral coated glass faced board. Xtratherm XT/FR MG boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the direction of the substrate and all edges must be fully supported by the de..
Guide Price: £85.34
£102.41 inc VAT
Guide Price
Brand: Xtratherm
Model: 1200x600mm - 2.88m2
Delivery Time: 3 - 5 days
Xtratherm FR-MG 110mm is a mineral coated glass faced board. Xtratherm XT/FR MG boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the direction of the substrate and all edges must be fully supported by the de..
Guide Price: £75.64
£90.77 inc VAT
Guide Price
Brand: Xtratherm
Model: 2400x1200 - 17.28m2
Delivery Time: 2 - 3 working days
62.5mm Xtratherm Safe-R Thermal Liner SR/TB-MF is a composite insulated panel of Xtratherm 50mm Phenolic core with a composite tissue facing bonded to a 12.5mm tapered edge plasterboard for internal applications, mechanically fixed. Xtratherm Safe-R Thermal Liner SR/TB-MF is designed to provide high..
Guide Price: £462.92
£555.50 inc VAT
Guide Price
Brand: Xtratherm
Model: 1200x600mm - 2.16m2
Delivery Time: 3 - 5 days
Xtratherm FR-MG 120mm is a mineral coated glass faced board. Xtratherm XT/FR MG boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the direction of the substrate and all edges must be fully supported by the de..
Guide Price: £62.32
£74.78 inc VAT