60mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 5)
60mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 5)
- Product Code: A1-4609
- Delivery Time: 1-3 working days
- Brand: Xtratherm (Tech. support: 03712221055)
- Model: 2400x1200mm - 14.4m2
- Weight: 27.65kg
Our ratings on 16-12-2024:
4.8 out of 5
60mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 5)
Width: 1200mm
Length: 2400mm
Pack Coverage: 14.4m2
Pack Quantity: 5
Density: 32kg/m3
Weight/m2: 1.92kg
Weight: 27.65kg
Thermal Conductivity: 0.022W/mK
R-Value: 2.27m2K/W
Compressive Strength: 150kPa
60mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Suitable for use below single ply mechanically fixed roof membranes.
Note: not suitable for applications with built-up bitumen based roofing or mastic asphalt systems.
APPLICATION
- Flat roof below single ply mechanically fixed roof membranes

CHARACTERISTICS
- Superior performance PIR foam core,
- Vapour-tight aluminium facings on both sides,
- Effective thermal,
- Contributes to limit the risk of condensation,
- Will have life as long as the roof waterproof covering,
- For new build or refurbishment,
- Rot proof and will remain effective for the life span of the building,
- Can be readily cut using a sharp knife or fine toothed saw
CERTIFICATION

Brand: Xtratherm
Model: 1200x600mm - 3.6m2
Delivery Time: 3 - 5 days
90mm Xtratherm FR-BGM is a PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. FR-BGM is suitable to apply torch on felt directly on the insulation. FR-BGM can also be used in mecha..
Guide Price: £84.43
£101.32 inc VAT
Brand: Xtratherm
Model: Thin-R - 2400 x 1200 - 2.88m2
Delivery Time: 1-3 working days
30mm Xtratherm Thin-r is a foil faced Polyisocyanurate (PIR) insulation board formed by a blowing process which generates rigid foam composed of fine cells filled with Pentane blowing agent trapped within the foam. Pentane has very good insulating properties and gives Thin-r superb insulating capabi..
Guide Price: £16.83
£20.20 inc VAT
Brand: Xtratherm
Model: 1200x2400mm - 2.88m2
Delivery Time: 1-3 working days
112.5mm Xtratherm XT/TL Thermal Liner Dot and Dab Insulated Plasterboard is a high performance rigid insulation board made from 15mm Xtratherm PIR core faced with composite kraft paper bonded to 12.5mm plasterboard, specially designed for internal walls dry lining and insulation, due to its closed c..
Guide Price: £106.65
£127.98 inc VAT
Brand: Xtratherm
Model: 1200x600mm - 2.16m2
Delivery Time: 3 - 5 days
Xtratherm FR-MG 140mm is a mineral coated glass faced board. Xtratherm XT/FR MG boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the direction of the substrate and all edges must be fully supported by the de..
Guide Price: £82.17
£98.60 inc VAT
Brand: Xtratherm
Model: 2400x1200 - 20.16m2
Delivery Time: 2 - 3 working days
52.5mm Xtratherm Safe-R Thermal Liner SR/TB is a composite insulated panel of Xtratherm 40mm Phenolic core with a composite tissue facing bonded to a 12.5mm tapered edge plasterboard for internal applications,fixed with dot & dab adhesive bonding. Xtratherm Safe-R Thermal Liner SR/TB is designed..
Guide Price: £453.75
£544.50 inc VAT
Brand: Xtratherm
Model: CT/PIR 1200x450 - 2.16m2
Delivery Time: 1-3 working days
100mm Xtratherm CavityTherm wall insulation board is a high performance composite board of enhanced PIR core with a lambda value of 0.021W/mK. The boards have gas tight facings with one face bonded to a profiled HIPS skin during manufacture to provide a drainage plane. CavityTherms unique engin..
Guide Price: £88.53
£106.24 inc VAT