158mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
158mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
- Product Code: A1-1630
- Delivery Time: 2 - 4 days
- Brand: Cellecta (Tech. support: 01634296677)
- Model: 600x2400mm - 1.44m2
- Weight: 23.33kg
Our ratings on 16-12-2024:
4.8 out of 5
158mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
Width: 600mm
Length: 2400mm
Density: 102.5kg/m3
Weight/m2: 16.2kg
Weight: 23.33kg
Thermal Conductivity: 0.034W/mK
R-Value: 4.65m2K/W
Compressive Strength: 300kPa
158mm Cellecta XCHiP is a high performance insulation board with a 18mm chipboard laminate facing. Cellecta XCHiP combines the benefits of HEXATHERM high performance thermal insulation with a P5 moisture resistant, tongue and groove chipboard to produce a high compressive strength, interlocking floor board.
CHARACTERISTICS
- High compressive strength,
- Interlocking, moisture resistant chipboard facing,
- Excellent life-long thermal performance,
- Quick to install,
- Able to withstand heavy point loads,
- Closed cell structure,
- Suitable for areas in close proximity to water,
- Blown with reclaimed CO2,
- 100% Recyclable,
- Super low U-values achievable
APPLICATION
Cellecta Hexatherm XCHiP is used for basements, above ground bearing concrete floor slabs, and on suspended beam and block floors.
CERTIFICATION
Manufactured in accordance with BS EN 13374 and tested to BS EN 12267
XChip_Suspended_Beam_and_Block_Floor_Thermal_Insulation_Below_Screed.pdf
Brand: Cellecta
Model: 1200x2400mm - 2.88m2
Delivery Time: 2 - 4 days
152mm Cellecta Hexatherm XPLY is a high performance extruded polystyrene thermal insulation roof board bonded to a 12mm plywood laminate facing, also suitable for internal walls and floors. It combines the benefits of high performance extruded polystyrene with a facing board to produce a compos..
Brand: Cellecta
Model: 1200mm x 2400mm - 2.88m2
Delivery Time: 2 - 4 days
66mm Cellecta Hexatherm XMD is a high performance extruded polystyrene thermal insulation board bonded to a 6mm thermal laminate facing, suitable for vertical upstands. It combines the benefits of high performance extruded polystyrene with a facing board to produce a composite thermal board to suit ..
Brand: Cellecta
Model: 1200x2400mm - 2.88m2
Delivery Time: 2 - 4 days
46mm Cellecta Hexatherm XCPL is a high performance extruded polystyrene thermal insulation board bonded to an high impact thermal laminate facing, suitable for car parks and soffits. It combines the benefits of high performance extruded polystyrene with a facing board to produce a composite the..
Brand: Cellecta
Model: 3mm
Delivery Time: 3 - 5 days
3mm Cellecta Rubberfon Packers is a part of a lightweight and extremely accurate levelling system that enables contractors to get the floors to within the nearest millimetre. It is a simple way to achieve high levels of acoustic insulation to meet Part E in concrete floors, while providing acceptabl..
Brand: Cellecta
Model: 600x2500mm - 1.50m2
Delivery Time: 7 - 10 days
250 grade Cellecta XFLO FF Underfloor Heating Insulation Board is a high performance extruded polystyrene underfloor insulation board, featuring channels to suit different pipe diameters and spacing required. Once covered with ScreedBoard 20, they would provide a quality heating solution for do..
Brand: Cellecta
Model: 1.5m x 50m - 75m2
Delivery Time: 2 - 3 working days
Cellecta HexaTex is a high performance thermal improvement membrane suitable for use on inverted roofs finished with gravel ballast, and concrete pavers on appropriate supports. Dramatically minimises the cooling effect associated with rainwater flowing down through the insulation and draining away...