138mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
138mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
- Product Code: A1-1629
- Delivery Time: 2 - 4 days
- Brand: Cellecta (Tech. support: 01634296677)
- Model: 600x2400mm - 1.44m2
- Weight: 22.46kg
Our ratings on 08-11-2024:
4.8 out of 5
138mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
Width: 600mm
Length: 2400mm
Density: 113kg/m3
Weight/m2: 15.6kg
Weight: 22.46kg
Thermal Conductivity: 0.034W/mK
R-Value: 4.06m2K/W
Compressive Strength: 300kPa
138mm Cellecta XCHiP is a high performance insulation board with a 18mm chipboard laminate facing. Cellecta XCHiP combines the benefits of HEXATHERM high performance thermal insulation with a P5 moisture resistant, tongue and groove chipboard to produce a high compressive strength, interlocking floor board.
CHARACTERISTICS
- High compressive strength,
- Interlocking, moisture resistant chipboard facing,
- Excellent life-long thermal performance,
- Quick to install,
- Able to withstand heavy point loads,
- Closed cell structure,
- Suitable for areas in close proximity to water,
- Blown with reclaimed CO2,
- 100% Recyclable,
- Super low U-values achievable
APPLICATION
Cellecta Hexatherm XCHiP is used for basements, above ground bearing concrete floor slabs, and on suspended beam and block floors.
CERTIFICATION
Manufactured in accordance with BS EN 13374 and tested to BS EN 12267
XChip_Suspended_Beam_and_Block_Floor_Thermal_Insulation_Below_Screed.pdf
Brand: Cellecta
Model: 600x2400mm - 1.44m2
Delivery Time: 2 - 4 days
78mm Cellecta XCHiP is a high performance insulation board with a 18mm chipboard laminate facing. Cellecta XCHiP combines the benefits of HEXATHERM high performance thermal insulation with a P5 moisture resistant, tongue and groove chipboard to produce a high compressive strength, interlocking ..
Brand: Cellecta
Model: 10mm x 120mm - 50m
Delivery Time: 3 - 5 days
10mm x 120mm Cellecta Yelofon ES10 Edge Strip is a Perimeter Flanking Isolation, a non cross linked, closed cell polyethylene strip to eliminate perimeter flanking transmission. For use with Screedboard 28 and 30.CHARACTRISTICSExcellent acoustic performance,Very quick and easy installation.APPLICATI..
Guide Price
Brand: Cellecta
Model: 600x2400mm - 1.44m2
Delivery Time: 3 - 5 days
Cellecta Deckfon 17T is an acoustic overlay board designed for conversion and refurbishment projects, where the joists are covered with a timber decking and the ceiling is to be replaced, in order of improving acoustic performance. The same effect can be reached in concrete floors, where the impact ..
Guide Price: £35.46
£42.55 inc VAT
Guide Price
Brand: Cellecta
Model: 1litre
Delivery Time: 3 - 5 days
Cellecta Fon Adhesive is a high strength acoustic adhesive specifically designed to bond DECKfon acoustic boards together at tongue & groove, for example, Screedboard 28. CHARACTERISTICS High strength adhesive Easy to apply No screws required Coverage: approximately 33m2 and is used in the interlock..
Guide Price: £19.80
£23.76 inc VAT
Guide Price
Brand: Cellecta
Model: 600x2400mm - 1.44m2
Delivery Time: 3 - 5 days
Cellecta Deckfon Chip 30T is an overlay treatment designed for conversion and refurbishment projects, especially used when the ceiling is to be replaced and joist are covered with a timber decking. Due to its excellent acoustic performance, it can also be used to reduce impact sound transmission in ..
Guide Price: £32.84
£39.41 inc VAT
Brand: Cellecta
Model: 600x1250mm - 0.75m2
Delivery Time: 2 - 4 days
50mm Cellecta Hexatherm XROOF 300L is an extruded polystyrene thermal insulation board designed specically for inverted roof applications where a high resistance to compression and water absorption is essential. XROOF roof insulation boards are ideal for a multitude of roofing requirements, includin..