62.5mm Unilin Safe-R SR/TB-MF (50mm Phenolic Core and 12.5mm Plasterboard) - Mechanical Fixing (pack of 6)
Guide Price
62.5mm Unilin Safe-R SR/TB-MF (50mm Phenolic Core and 12.5mm Plasterboard) - Mechanical Fixing (pack of 6)
Guide Price: £462.92 (£555.50 inc VAT)
Price per m2: £26.79/m2 (£32.15 inc VAT)
2 or more £448.00 (£537.60 inc VAT)
4 or more £432.97 (£519.56 inc VAT)
5 or more £418.07 (£501.68 inc VAT)
- Product Code: A1-4885
- Delivery Time: 2 - 3 working days
- Brand: Unilin (prev. Xtratherm)
- Model and Size: 2400x1200 - 17.28m2
Our ratings on 16-12-2024:
4.8 out of 5
62.5mm Unilin Safe-R SR/TB-MF (50mm Phenolic Core + 12.5mm Plasterboard) - Mechanical Fixing (pack of 6)
Length: 2400mm
Width: 1200mm
Thickness: 62.5mm
Pack Quantity: 6
Board Coverage: 2.88m2
Pack Coverage: 17.28m2
Thermal Conductivity: 0.021W/mK
R-Value: 2.45m2K/W
62.5mm Unilin Safe-R SR/TB-MF is a composite insulated panel of 50mm Phenolic core with a composite foil facing bonded to a 12.5mm tapered edge plasterboard for internal applications, mechanically fixed. Unilin Safe-R SR/TB-MF is designed to provide high levels of thermal insulation and dry lining in one operation for masonry walls. Unilin Safe-R SR/TB-MF incorporates an integral vapour control layer, which helps to reduce the risk of condensation. It can be used as a composite plasterboard for internal walls, sloped roofs and ceilings.
Note: This product was formerly known as 62.5mm Xtratherm Safe-R Thermal Liner SR/TB-MF
CHARACTERISTICS
- Superior performance phenolic foam,
- Low thermal conductivity,
- Effective thermal and fire performance,
- Can be readily cut using a fine toothed saw,
- Rot proof and will remain effective for the life span of the building,
APPLICATION
- Internal wall drylining for new build or refurbishment,
- For internal walls, sloped roofs and ceilings.
INSTALLATION
- Fix a pre-treated timber batten horizontally at ceiling level and another 20mm above the finished floor level.
- Fix vertical battens at max 600mm centres.
- Ensure battens are wide enough to offer 20mm support to all four edges of the plasterboard.
- Pack battens if necessary to level the wall.
- Trim all openings and service penetrations with timber battens.
- Insulation should be cut back to accommodate an adjoining panel at external corners.
- Lift the SR/TB-MF into position using wedges on the floor.
- Screws should be fixed to the timber batten at 150mm centres, at least 12mm in from the board edge.
- The fixings should penetrate at least 25mm into the batten.
- Installation must be in accordance BS 8212:1988.
- Fill any gaps with foam filler.
CERTIFICATION
Unilin Safe-R SR/TB is manufactured to EN ISO 13166 under - Quality Systems approved to EN ISO 9001, Quality Management,
- EN ISO 14001 Environmental Management,
- ISO 45001 Occupational Health and Safety Management System.
Unilin_SR_TB-MF_datasheet.pdf
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200mm x 600mm - 12.96m2
Delivery Time: 3 - 5 days
25mm Unilin FR/MG is a high performance PIR core with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt. It is compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed ..
Guide Price: £118.77
£142.52 inc VAT
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200x600mm - 1.44m2
Delivery Time: 1-3 working days
100mm Unilin Stonewool SW/RS Insulation Slab is a non-combustible Euroclass A1 stone wool insulation used as ventilated rainscreen façade and framing applications and curtain walling. Unilin Stonewool SW/RS insulation provides a uniform, high density solution providing resilience during the bui..
Brand: Unilin (prev. Xtratherm)
Model and Size: 2400x1200mm - 17.28m2
Delivery Time: 1-3 working days
50mm Unilin Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Unilin Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Unilin Thin..
Brand: Unilin (prev. Xtratherm)
Model and Size: 2400x1200mm - 17.28m2
Delivery Time: 2 - 3 working days
50mm Unilin Safe-R SR/UF Phenolic foam is a superior performance rigid underfloor insulation with enhanced fire performance, consisting of an Euroclass D s1 d0 phenolic foam core with negligible smoke obscuration. Unilin Safe-R SR/UF is faced with low emissivity aluminium facings both..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 2400x1200 - 11.52m2
Delivery Time: 2 - 3 working days
112.5mm Unilin Safe-R SR/TB is a composite insulated panel of of 100mm Unilin Phenolic core with a glass tissue facing, bonded to a 12.5mm tapered edge plasterboard for internal applications. Unilin Safe-R SR/TB composite insulation board is fixed with dot & dab adhesive bonding. It is designed ..
Guide Price: £493.60
£592.32 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 2400x1200 - 11.52m2
Delivery Time: 2 - 3 working days
92.5mm Unilin Safe-R SR/TB is a composite insulated panel of of 80mm Unilin Phenolic core with a glass tissue facing, bonded to a 12.5mm tapered edge plasterboard for internal applications. Unilin Safe-R SR/TB composite insulation board is fixed with dot & dab adhesive bonding. It is designed to..
Guide Price: £419.69
£503.63 inc VAT