52.5mm Unilin Safe-R SR/TB-MF (40mm Phenolic Core and 12.5mm Plasterboard) - Mechanical Fixing (pack of 7)
Guide Price
52.5mm Unilin Safe-R SR/TB-MF (40mm Phenolic Core and 12.5mm Plasterboard) - Mechanical Fixing (pack of 7)
Guide Price: £520.50 (£624.60 inc VAT)
Price per m2: £25.82/m2 (£30.98 inc VAT)
- Product Code: A1-4884
- Delivery Time: 2 - 3 working days
- Brand: Unilin (prev. Xtratherm) (Tech. support: 03712221055)
- Model: 2400x1200 - 20.16m2
Our ratings on 08-11-2024:
4.8 out of 5
52.5mm Unilin Safe-R SR/TB-MF (40mm Phenolic Core + 12.5mm Plasterboard) - Mechanical Fixing (pack of 7)
Length: 2400mm
Width: 1200mm
Thickness: 52.5mm
Pack Quantity: 7
Board Coverage: 2.88m2
Pack Coverage: 20.16m2
Thermal Conductivity: 0.023W/mK
R-Value: 1.8m2K/W
52.5mm Unilin Safe-R SR/TB-MF is a composite insulated panel of 40mm Phenolic core with a composite foil facing bonded to a 12.5mm tapered edge plasterboard for internal applications, mechanically fixed. Unilin Safe-R SR/TB-MF is designed to provide high levels of thermal insulation and dry lining in one operation for masonry walls. Unilin Safe-R SR/TB-MF incorporates an integral vapour control layer, which helps to reduce the risk of condensation. It can be used as a composite plasterboard for internal walls, sloped roofs and ceilings.
Note: This product was formerly known as 52.5mm Xtratherm Safe-R Thermal Liner SR/TB-MF
CHARACTERISTICS
- Superior performance phenolic foam,
- Low thermal conductivity,
- Effective thermal and fire performance,
- Can be readily cut using a fine toothed saw,
- Rot proof and will remain effective for the life span of the building,
APPLICATION
- Internal wall drylining for new build or refurbishment,
- For internal walls, sloped roofs and ceilings.
INSTALLATION
- Fix a pre-treated timber batten horizontally at ceiling level and another 20mm above the finished floor level.
- Fix vertical battens at max 600mm centres.
- Ensure battens are wide enough to offer 20mm support to all four edges of the plasterboard.
- Pack battens if necessary to level the wall.
- Trim all openings and service penetrations with timber battens.
- Insulation should be cut back to accommodate an adjoining panel at external corners.
- Lift the SR/TB-MF into position using wedges on the floor.
- Screws should be fixed to the timber batten at 150mm centres, at least 12mm in from the board edge.
- The fixings should penetrate at least 25mm into the batten.
- Installation must be in accordance BS 8212:1988.
- Fill any gaps with foam filler.
CERTIFICATION
Unilin Safe-R SR/TB is manufactured to EN ISO 13166 under- Quality Systems approved to EN ISO 9001, Quality Management,
- EN ISO 14001 Environmental Management,
- ISO 45001 Occupational Health and Safety Management System.
Note: Bonding of the Unilin Insulation board with other materials may be made by Unilin or a different fabricator.
Unilin_SR_TB-MF_datasheet.pdf
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 450mm - 1.62m2
Delivery Time: 2 - 4 days
140mm Unilin Thin-R Plus XT/CF is a superior performance, enhanced polyisocyanurate (PIR) insulation, specifically engineered for full-fill thermal insulation in new external masonry cavity walls. This advanced insulation board is designed to meet and exceed the stringent thermal requirements of Bri..
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 8.64m2
Delivery Time: 7 - 10 days
120mm Unilin Safe-R 019/MA (Roofs) is a high‑performance phenolic insulation board designed specifically for warm roof applications where exceptional thermal efficiency is required with minimal added build‑up. Its advanced phenolic core delivers one of the lowest thermal conductivities available in ..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 2.88m2
Delivery Time: 1-3 working days
40mm Unilin Thin-r XT/PR-UF has a core of polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings. Unilin XT/PR-UF board offers excellent insulation performance with excellent thermal conductivity. Unilin XT/PR-UF is CFC & HCFC free and is manufactured under the high..
Guide Price: £23.47
£28.16 inc VAT
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200mm - 5.76m2
Delivery Time: 1-3 working days
150mm Unilin Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Unilin Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Unilin Thin-R F..
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 2.88m2
Delivery Time: 7 - 10 days
156mm Unilin Safe-R 019/STP Phenolic Soffit Insulation Board is a high‑performance phenolic soffit insulation board designed for structural ceiling applications where both thermal efficiency and fire performance are critical. It combines a rigid phenolic insulation core with low‑emissivity foil..
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 5.76m2
Delivery Time: 7 - 10 days
150mm Unilin Safe-R 019/MA (Soffit) Phenolic Insulation Board is a high‑performance phenolic insulation board designed for use on the underside of structural ceilings in both commercial and residential buildings. It delivers strong thermal efficiency and reliable fire performance, making it a robust..