50mm JCW Acoustic Batten 50C
Guide Price
50mm JCW Acoustic Batten 50C
Guide Price: £6.43 (£7.72 inc VAT)
To add to cart change quantity to minimum of 275. If you need less, ask for a price or add to a quote list.
1100 or more £5.96 (£7.15 inc VAT)
1650 or more £5.58 (£6.70 inc VAT)
- Product Code: A1-1974
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 50x42x1800mm
- Weight: 1.90kg
Our ratings on 16-12-2024:
4.8 out of 5
50mm JCW Acoustic Batten 50C
Width: 42mm
Length: 1800mm
Weight: 1.9kg
JCW Acoustic Batten 50C is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 40mm timber batten for use on concrete subfloors. The JCW Acoustic Batten 50C offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with an 18mm tongued and grooved chipboard and plywood or engineered hardwood flooring.
- Easy to install,
- Raised floor space can be used for installing services,
- Ideal for good impact sound improvement where height permits,
- In refurbishments: overlaid onto flat timber or concrete floors
- New build
- Refurbishments
- Domestic upgrade
- On concrete subfloors
- Sweep floor clear of debris,
- Position JCW Perimeter Edging Strip at the base of all perimeter walls,
- Lay a continuous run of JCW Acoustic Battens, foam side down, around the floor perimeter, leaving a 50mm gap between the battens and the walls,
- Lay mineral wool quilt between the battens,
- Lay the plasterboard plank to the battens, staggering the joints and ensuring that all short edges of plank rest centrally on a batten.
- Butt the plasterboard plank up to the perimeter edging strip,
- Lay the chipboard flooring sheets with the long edge across the battens. Short joints should be staggered and supported by extra sections of batten.
- Screw fix through the chipboard sheets, plasterboard plank and into the battens at 300mm centres, ensuring that no screws penetrate into the battens resilient foam layer.
- To ensure tight jointing, each tongue and groove is glued with JCW Waterproof PVA Adhesive. Chipboard can also be spot bonded to the layer of plank.
- Remove tongues and grooves from chipboard sheets at the perimeter to ensure that only square cut edges butt up to the JCW Perimeter Edging Strip,
- Any unavoidable gaps are filled with JCW Acoustic Sealant,
- The JCW Perimeter Edging Strip is folded over the chipboard floor and trapped under the skirting board the excess is then trimmed to finish flush to the skirting board,
- The completed floor should not be walked on for at least 48 hours to ensure the adhesive has fully cured.
JCW Acoustic Batten 50C had been tested in Building Research Establishment Ltd, an UKAS accredited laboratory.
Batten-50C-Datasheet.pdf
Guide Price
Brand: JCW
Model and Size: 1.05x10m - 10.50m2
Delivery Time: 2 - 3 working days
5mm JCW Impacta Rubber Roll is Sound Insulation System for concrete floors, robust resilient under screed layer system. It is suitable for precast and solid concrete floors (minimum weight 300kg/m2). JCW Impacta Rubber is a tough, puncture-proof, heavy material designed for the professional buildin..
Guide Price: £93.82
£112.58 inc VAT
Guide Price
Brand: JCW
Model and Size: 2400x600mm - 1.44m2
Delivery Time: 2 - 3 working days
34mm JCW Acoustic Deck 34C is a premium quality overlay board with a 12mm resilient acoustic layer laminated to a 22mm P5 T&G chipboard. The slim profile and high acoustic performance makes it ideal for timber floor refurbishment projects. Acoustic Deck 34C is ideal for overlaying directly to an..
Guide Price: £62.72
£75.26 inc VAT
Guide Price
Brand: JCW
Model and Size: JCW ASFP - 62.40m2
Delivery Time: 2 - 3 working days
JCW Acoustic Screed Foam Pack is a complete concrete floor under screed resilient layer pack containing JCW Acoustic Screed Foam, JCW Acoustic Flanking Strip and JCW Acoustic Flanking Strip. This is a big value acoustic foam pack which reduces impact and airborne noise on concrete floors. Acoustic ..
Guide Price: £256.86
£308.23 inc VAT
Guide Price
Brand: JCW
Model and Size: 15 litre
Delivery Time: 2 - 3 working days
JCW Impacta Flooring Adhesive is a specially formulated adhesive for JCW Impacta rubber and mats. Impacta adhesive has a special additive to prevent plastaciser migration of rubber into finish floor covering's like Vinyl etc.APPLICATIONNew buildRefurbishmentsDomestic upgradeCan be bonded to all type..
Guide Price: £45.51
£54.61 inc VAT
Guide Price
Brand: JCW
Model and Size: 5mm x 150mm - Free Delivery
Delivery Time: 2 - 3 working days
5mm JCW Perimeter Edging Strip is a foam strip to isolate acoustic flooring from perimeter walls and maintain the acoustic integrity of the structure. For use with Acoustic Battens, Acoustic Cradles and Acoustic Decks.APPLICATIONTo isolate acoustic flooring from perimeter walls CERTIFICATIONIt has b..
Guide Price: £48.73
£58.48 inc VAT
Guide Price
Brand: JCW
Model and Size: 1200x5000mm - 6.00m2
Delivery Time: 2 - 3 working days
2mm JCW Acoustic Barrier Mat is an acoustic barrier matting that offers very good airborne performance across the frequency range. It is a very versatile and dense product that is used for a wide range of applications where airborne sound reduction is required. The most common installation areas are..
Guide Price: £63.61
£76.33 inc VAT