30mm Unilin XtroLiner XO/PR Pitched Roof PIR Insulation Board - 1200mm x 2400mm - Pack of 10
30mm Unilin XtroLiner XO/PR Pitched Roof PIR Insulation Board - 1200mm x 2400mm - Pack of 10
- Product Code: A1-5012
- Delivery Time: 1-3 working days
- Brand: Unilin (prev. Xtratherm) (Tech. support: 03712221055)
- Model: 1200x2400mm - 28.8m2
Our ratings on 08-11-2024:
4.8 out of 5
30mm Unilin XtroLiner XO/PR Pitched Roof PIR Insulation Board - 1200mm x 2400mm - Pack of 10
Length: 2400mm
Width: 1200mm
Thickness: 30mm
Pack Quantity: 10
Board Coverage: 2.88m2
Pack coverage: 28.8m2
Thermal Conductivity: 0.021W/mK
R-Value: 1.4m2K/W
Compressive Strength: 150kPa
30mm Unilin XtroLiner XO/PR board has a core of modified polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings. Unilin XtroLiner XO/PR board offers excellent insulation performance with excellent thermal conductivity. Unilin XtroLiner XO/PR is CFC & HCFC free and is manufactured under the highest standards of ISO 9001 and 14001 Quality and Environmental Management Systems.
Note: This product was formerly known as 30mm Xtratherm XtroLiner XO/PR Pitched Roof PIR Insulation Board
CHARACTERISTICS
- High Thermal Performance Rigid Insulation,
- Easy to Install,
- Non-deleterious material,
- Suitable for new build and refurbishment,
- Manufactured with zero ODP blowing agent,
- Reduces Thermal Bridging,
- Reaction to fire: Euroclass C s2 d0,
- Closed cell structure – moisture resistant
APPLICATION
- Pitched roof
- Ventilated roof
- Warm roof
- Above and between rafters
- Under rafters, above ceilings
INSTALLATION
Ventilated Roofs
- Allow for ventilation gaps normally 50mm. (May be reduced depending on breather membrane certification).
- Cut XtroLiner boards to fit tightly between rafters flush with rafter bottom. An additional 2nd layer should be added to the underside of the rafter.
- Run second layer transverse to the first.
- Temporarily fix with nails.
- Provide vapour control layer (Aluminium tape joints).
- Finish with 12.5mm plasterboard fixed with drylining screws. Screw fix every 150mm, 12mm from edge of boards.
- All board edges should be supported.
Warm roofs
- Ensure cavity wall insulation has continued to roof height to engage with roof insulation.
- Fix a timber stop rail to end of rafter at eaves.
- Lay Unilin XtrolinerXO/PR insulation stagger jointed over rafters ensuring joints are supported by rafters.
- Ensure boards are tightly butted fill any gaps with expanding foam. A vapour permeable underlay should be fitted; refer to manufacturers Agrèment certification.
- Providing an unvented void under the membrane can improve the thermal performance.
- Fix counter batten with approved fixings.
- Ventilation may have to be provided subject to certification.
- A second layer of insulation may be added between the rafters.
- Provide a vapour control layer to the underside of the construction.
- Current Building Regulations/Standards should be considered with regard to the requirements for and/or provision of fire stops.
CERTIFICATION
BBA_Certificate_Xtroliner_XO_PR.pdf
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200x450mm - 2.16m2
Delivery Time: 2 - 4 days
100mm Unilin ThinR XT/CW Partial Fill Cavity Wall Insulation Board is a PIR insulation board with a high thermal performance whilst maintaining a residual cavity in the external walls. This board achieves high standards of insulation with a certified thermal conductivity of 0.022W/mK with the o..
Guide Price: £47.48
£56.98 inc VAT
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200mm - 20.16m2
Delivery Time: 2 - 3 working days
40mm Unilin Safe-R SR/UF Phenolic foam is a superior performance rigid underfloor insulation with enhanced fire performance, consisting of an Euroclass D s1 d0 phenolic foam core with negligible smoke obscuration. Unilin Safe-R SR/UF is faced with low emissivity aluminium facings both sides, and has..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200x450mm - 3.24m2
Delivery Time: 2 - 4 days
70mm Unilin ThinR XT/CW Partial Fill Cavity Wall Insulation Board is a PIR insulation board with a high thermal performance whilst maintaining a residual cavity in the external walls. This board achieves high standards of insulation with a certified thermal conductivity of 0.022W/mK with the op..
Guide Price: £55.40
£66.48 inc VAT
Brand: Unilin (prev. Xtratherm)
Model: 1200x450mm - 4.86m2
Delivery Time: 2 - 3 working days
60mm Unilin Safe-R SR/CW Phenolic Foam Insulation Board is a superior performance rigid partial fill cavity insulation board with enhanced fire performance, consisting of an Euroclass D-s1, d0 phenolic foam core with negligible smoke obscuration. Unilin Safe-R SR/CW is faced with low emissivity alum..
Brand: Unilin (prev. Xtratherm)
Model: 1200x450mm - 2.16m2
Delivery Time: 2 - 3 working days
100mm Unilin Safe-R SR/CW Phenolic Foam Insulation Board is a superior performance rigid partial fill cavity insulation board with enhanced fire performance, consisting of an Euroclass D-s1, d0 phenolic foam core with negligible smoke obscuration. Unilin Safe-R SR/CW is faced with low emissivity alu..
Brand: Unilin (prev. Xtratherm)
Model: 1200x2400mm - 11.52m2
Delivery Time: 1-3 working days
100mm Unilin Thin-R Hyfloor XT/HYF is a high performance floor Insulation board with superior thickness to performance ratio allowing the lower targets required under the new Building Regulations to be achieved with minimum thicknesses. Unilin Thin-R Hyfloor XT/HYF is a high performance foil faced P..