50mm Unilin XtroLiner XO/PR Pitched Roof PIR Insulation Board - 1200mm x 2400mm - Pack of 6
50mm Unilin XtroLiner XO/PR Pitched Roof PIR Insulation Board - 1200mm x 2400mm - Pack of 6
- Product Code: A1-5014
- Delivery Time: 1-3 working days
- Brand: Unilin (prev. Xtratherm) (Tech. support: 03712221055)
- Model: 1200x2400mm - 17.28m2
Our ratings on 08-11-2024:
4.8 out of 5
50mm Unilin XtroLiner XO/PR Pitched Roof PIR Insulation Board - 1200mm x 2400mm - Pack of 6
Length: 2400mm
Width: 1200mm
Thickness: 50mm
Pack Quantity: 6
Board Coverage: 2.88m2
Pack coverage: 17.28m2
Thermal Conductivity: 0.021W/mK
R-Value: 2.35m2K/W
Compressive Strength: 150kPa
50mm Unilin XtroLiner XO/PR board has a core of modified polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings. Unilin XtroLiner XO/PR board offers excellent insulation performance with excellent thermal conductivity. Unilin XtroLiner XO/PR is CFC & HCFC free and is manufactured under the highest standards of ISO 9001 and 14001 Quality and Environmental Management Systems.
Note: This product was formerly known as 50mm Xtratherm XtroLiner XO/PR Pitched Roof PIR Insulation Board
CHARACTERISTICS
- High Thermal Performance Rigid Insulation,
- Easy to Install,
- Non-deleterious material,
- Suitable for new build and refurbishment,
- Manufactured with zero ODP blowing agent,
- Reduces Thermal Bridging,
- Reaction to fire: Euroclass C s2 d0,
- Closed cell structure – moisture resistant
APPLICATION
- Pitched roof
- Ventilated roof
- Warm roof
- Above and between rafters
- Under rafters, above ceilings
INSTALLATION
Ventilated Roofs
- Allow for ventilation gaps normally 50mm. (May be reduced depending on breather membrane certification).
- Cut XtroLiner boards to fit tightly between rafters flush with rafter bottom. An additional 2nd layer should be added to the underside of the rafter.
- Run second layer transverse to the first.
- Temporarily fix with nails.
- Provide vapour control layer (Aluminium tape joints).
- Finish with 12.5mm plasterboard fixed with drylining screws. Screw fix every 150mm, 12mm from edge of boards.
- All board edges should be supported.
Warm roofs
- Ensure cavity wall insulation has continued to roof height to engage with roof insulation.
- Fix a timber stop rail to end of rafter at eaves.
- Lay Unilin XtrolinerXO/PR insulation stagger jointed over rafters ensuring joints are supported by rafters.
- Ensure boards are tightly butted fill any gaps with expanding foam. A vapour permeable underlay should be fitted; refer to manufacturers Agrèment certification.
- Providing an unvented void under the membrane can improve the thermal performance.
- Fix counter batten with approved fixings.
- Ventilation may have to be provided subject to certification.
- A second layer of insulation may be added between the rafters.
- Provide a vapour control layer to the underside of the construction.
- Current Building Regulations/Standards should be considered with regard to the requirements for and/or provision of fire stops.
CERTIFICATION
BBA_Certificate_Xtroliner_XO_PR.pdf
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 2.88m2
Delivery Time: 7 - 10 days
106mm Unilin Safe-R 019/STP Phenolic Soffit Insulation Board is a high‑performance phenolic soffit insulation board designed for structural ceiling applications where both thermal efficiency and fire performance are critical. It combines a rigid phenolic insulation core with low‑emissivity foil..
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200mm - 2.88m2
Delivery Time: 2 - 3 working days
66mm Unilin Xtroliner XO/STP PIR Soffit Plus Board (60mm PIR + 6mm Building Panel) is a superior performance ceiling insulation board with enhanced fire performance, consisting of an Euroclass B s1 d0 PIR foam core with negligible smoke obscuration. Unilin Xtroliner XO/STP PIR core is faced with low..
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200mm - 34.56m2
Delivery Time: 2 - 3 working days
25mm Unilin Safe-R SR/UF Phenolic foam is a superior performance rigid underfloor insulation with enhanced fire performance, consisting of an Euroclass D s1 d0 phenolic foam core with negligible smoke obscuration. Unilin Safe-R SR/UF is faced with low emissivity aluminium facings both sides, and has..
Brand: Unilin (prev. Xtratherm)
Model: 1200x2400mm - 11.52m2
Delivery Time: 1-3 working days
100mm Unilin ECO360 MA Sarking PIR Insulation board has a bio-enhanced, halogen free core of modified polyisocyanurate (PIR) pitched roof insulation bonded to textured low emissivity foil facings. Unilin ECO360 MA Sarking board offers excellent insulation performance with excellent th..
Brand: Unilin (prev. Xtratherm)
Model: 1200x450mm - 2.16m2
Delivery Time: 1-3 working days
110mm Unilin ECO360/CW Partial Fill Cavity Wall board has a core of modified polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings offering excellent insulation performance with thermal conductivity. Unilin ECO360 CW board reduces the junctions prone to thermal b..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 11.52m2
Delivery Time: 2 - 3 working days
80mm Unilin Safe-R SR/PR Phenolic Foam Insulation Board is a superior performance rigid insulation for pitched roofs with enhanced fire performance, consisting of a Class O phenolic foam core with negligible smoke obscuration. Safe-R is faced with low emissivity aluminium facings both sides, and has..
Guide Price: £371.67
£446.00 inc VAT