170mm WEC End Cap for Verge Trim Profiles can be used with; WEC 771, WEC 781, WEC 791 AND IGT range of profiles. Manufactured in 1.2mm pre-coated white aluminium...

62mm x 7mm x 9mm Aluminium Black Finish Bird Beak Facade Joint Profile length of 2.5m. Coated on both sides. This joint profile subtly depicts the joint whilst effectively closing it. The beading along the profile also centres and guides the facade cladding joint. If used horizontally and if no..

470mm Aluminium Rail System Connector profile to be used in an External Thermal Insulation Systems with 50mm EPS.INSTALLATIONFix the starter track of the rail system to the wall with dowel screws to the substrate. Dowels should be installed at a max. spacing of 30 cm. Apply an adhesive dab on the in..

12mm PVC Edge Bead is an extruded asymmetric profile with one perforated leg and pre-formed arris to accommodate jointing material. It is used to define and protect exposed plasterboard edges...

200mm WEC 771 Verge Trim Profile is designed for use in situations where sealing the rear of the profile is possible. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soaking the insulation.Manufactured in 1...