STEICOmulti Nail - Nail Sealing Tape for Counter-Battens - 50mm x 30m roll
STEICOmulti Nail - Nail Sealing Tape for Counter-Battens - 50mm x 30m roll
Length: 30000mm
Width: 50mm
STEICOmulti Nail is a single-sided, self-adhesive sealing tape made from high-quality closed-cell polyethylene. It is designed to be applied beneath counter-battens to create a watertight seal around the penetrations made by nails and screws, preventing water from tracking into the rafter space. STEICOmulti nail (often referred to as nail sealing tape) is a critical component for ensuring the long-term watertightness of a roof. When you fix counter-battens over a breather membrane, every nail or screw creates a potential leak path; this tape is the gasket that seals those holes.
CHARACTERISTICS
- Made from expanded polyethylene with a synthetic rubber adhesive. The closed-cell nature means it cannot absorb water, ensuring that even if water gets under the batten, it won't soak into the tape or the timber.
- The tape is highly compressible and elastic. When a nail or screw is driven through the counter-batten and the tape, the material tightly hugs the fastener, creating a permanent gasket.
- Engineered to last the lifetime of the roof, it is resistant to rot and the temperature fluctuations common in roofing voids.
- Supplied in 30m rolls, it is easy to apply directly from the roll onto the membrane or the underside of the batten.
- It provides an additional layer of security, especially when using STEICOmulti UDB or STEICOsafe as a temporary roof covering before the tiles are laid.
APPLICATION
- Roof Construction: Applied under counter-battens on pitched roofs to seal the primary fixings.
- Timber Frame Walls: Can also be used behind vertical battens in rainscreen cladding systems to protect the breather membrane from moisture ingress at fixing points.
- Renovation Projects: Essential when upgrading old roofs to modern airtight and watertight standards.
Brand: Steico
Model: 1.5m x 30m - 45m2
Delivery Time: 2 - 4 weeks
STEICOmulti CAP is a specialised, vapour-permeable, self-adhesive film designed to protect timber components from the elements during construction. Unlike a standard breather membrane that you staple on, this is a peel-and-stick solution that bonds directly to the wood, providing an immediate, slip-..
Brand: Steico
Model: 1880mm x 600mm - 18.08m2
Delivery Time: 2 - 4 weeks
140mm STEICO Special Dry is a multi-purpose, rigid wood-fibre insulation board manufactured using the modern Dry Process. It is designed to be installed on top of rafters (sarking) or on the outside of timber frame studs (sheathing). Because it is produced in a dry process, it can be manufactur..
Brand: Steico
Model: 1325mm x 600mm - 22.40m2
Delivery Time: 2 - 4 weeks
80mm STEICO Special Dry is a multi-purpose, rigid wood-fibre insulation board manufactured using the modern Dry Process. It is designed to be installed on top of rafters (sarking) or on the outside of timber frame studs (sheathing). Because it is produced in a dry process, it can be manufacture..
Brand: Steico
Model: 1880mm x 600mm - 1.13m2
Delivery Time: 2 - 4 days
100mm STEICO Special Dry is a multi-purpose, rigid wood-fibre insulation board manufactured using the modern Dry Process. It is designed to be installed on top of rafters (sarking) or on the outside of timber frame studs (sheathing). Because it is produced in a dry process, it can be manufactur..
Brand: Steico
Model: 1325mm x 600mm - 30.40m2
Delivery Time: 2 - 4 weeks
60mm STEICO Special Dry is a multi-purpose, rigid wood-fibre insulation board manufactured using the modern Dry Process. It is designed to be installed on top of rafters (sarking) or on the outside of timber frame studs (sheathing). Because it is produced in a dry process, it can be manufacture..
Brand: Steico
Model: 1880mm x 600mm - 1.13m2
Delivery Time: 2 - 4 days
40mm STEICO Universal Dry is a high-performance, rigid wood-fibre board designed for both roof and wall applications. It is engineered to provide a wind-tight, weather-protecting "skin" for the building envelope. Using the dry manufacturing process allows for a board that is easier to handle than it..


