30mm Monodeck 30T Timber Floor Acoustic Overlay Board
30mm Monodeck 30T Timber Floor Acoustic Overlay Board
- Product Code: A1-1290
- Delivery Time: 3 - 5 days
- Brand: Isomass (Tech. support: 08458383389)
- Model: 2400x600mm - 1.44m2
- Weight: 21.90kg
Our ratings on 08-11-2024:
4.8 out of 5
30mm Monodeck 30T Timber Floor Acoustic Overlay Board
Width: 600mm
Length: 2400mm
Board Coverage: 1.44m2
Density: 507kg/m3
Weight/m2: 15.2kg
Weight: 21.9kg
Monodeck 30T is an acoustic insulation overlay platform system bonded direct to floorboards, designed for soundproofing and improving acoustic performance of timber floors, whenever finished floor height is not critical. The system is used in new build, refurbishment and conversion applications, able to reduce impact sound transmission in wooden floors and able to meet the requirements of the Building Regulations, Approved Document E 2003 (including the subsequent amendments in 2004, 2010 and 2013). The system includes 22mm V313 P5 moisture resistant chipboard bonded to 8mm Acoustic Chip Foam (ACF).
CHARACTERISTICS
- Great acoustic properties;
- Able to reduce impact sound transmission in finished wooden floors;
- Able to meet values prescribed by the Approved Document E of the Building Regulations, when installed as part of a complete party floor construction;
- Includes a moisture-resistant chipboard.
APPLICATION
Monodeck 30T is applicable over existing floorboards on timber joisted floors, in refurbishment, conversion projects and new build, with a new resilient bar ceiling.
INSTALLATION
- All invasive fittings must be properly treated,
- All structural wall should be sealed,
- The sub-floor, which must be clean and dry, should be covered with proper insulation layer consisting of mineral wool insulation, added between the floor joists,
- The entire structure needs to be watertight,
- The product must be kept and stored in dry conditions.
- Apply Isocheck Acoustic Angled Flanking Band on the edges of the Isocheck boards just before they are pushed against the perimeter walls to isolate the board from the wall.
- Lay monodeck 30T over a structural timber sub-floor, in brick bond pattern, applying Isocheck adhesive to all tongued and grooved panel joints.
- Install skirting and trim off excess Flanking Band.
CERTIFICATION
The product is in compliance with Approved Document E of the Building Regulations.
monodeck17t26t30t_data_sheet.pdf
Guide Price
Brand: Isomass
Model: 600x2400mm - 1.44m2
Delivery Time: 3 - 5 days
26mm Isocheck Primo is an overlay platform system, designed for reducing sound transmission and improving acoustic performance of composite and traditional steel and timber joisted floors in kitchen and bathroom areas. The system is used in masonry and timber frame new build, kitchen and bathro..
Guide Price: £31.51
£37.81 inc VAT
Brand: Isomass
Model: 310ml
Delivery Time: 1 - 2 days
310ml Isomass Isocheck Intumescent Acoustic FR Sealant is a sealing and fire stopping product intended for penetration services and linear joint and gap seals. Isocheck acoustic fire rated sealant is used to reduce the unwanted airborne sound that is commonly found to pass around the junction betwee..
Brand: Isomass
Model: 1500mm x 1200mm - 1.8m2
Delivery Time: 3 - 5 days
40mm Isocheck ReVerb Wall Panel a high-performance acoustic absorption solution designed to effectively control reverberation and improve sound clarity within a wide range of interior spaces. This decorative panel would reduce echo and background noise, creating a more comfortable and intelligible a..
Brand: Isomass
Model: 6/12 - 30mm - 4m Free Delivery
Delivery Time: 1 - 2 days
30mm Isocheck Expandastrip 6/12 is a permanently elastic open cell Polyurethane foam, used as a seal in joints between pre-cast units, sealing around doors and window frames, or between corrugated roofing panels, roof structures and roof lights ventilation and air conditioning ductwork. It is impreg..
Brand: Isomass
Model: 1200mm x 1500mm - 1.8m2
Delivery Time: 1 - 2 days
40mm x 1200mm x 1500mm Isocheck Absorba Ceiling and Wall Panels are designed to absorb sound and reduce reverberation noise. The tiles comprise a fibreglass core with a white speckled laminated coating. They also have reinforced bevel edges contributing to allowing unique wall and ceiling designs. T..
Brand: Isomass
Model: 55mm - 17mm
Delivery Time: 2 - 3 working days
55mm Isocheck Isolation Washers are used to isolate and separate mechanical fixings from the surrounding structure and reduce the transfer of noise and vibration.Diameter A = 55mmDiameter screw B = 17mm..