MGC Quick Drying Stain Block - 2.5 Litre

MGC Quick Drying Stain Block - 2.5 Litre
Price: £44.91 (£53.89 inc VAT)
- Product Code: A1-3064
- Delivery Time: 2 - 3 working days
- Brand: MGC (Tech. support: 01372743334)
- Model and Size: 2.5 litres
Our ratings on 16-12-2024:

4.8 out of 5
MGC Quick Drying Stain Block - 2.5 Litre
Volume: 2.5litres
2.5 Litre MGC Quick Drying Stain Block is a water based matt white blocking primer that has excellent adhesion to plaster, wood and previously painted surfaces. It will seal all stains -- bitumen, creosote, nicotine, tannin, asphalt, crayon, graffiti, rust, soot, water stains -- preventing them from bleeding through and spoiling new decorations. When dry it can be decorated over with any type of paint, undercoat or wallpaper. MGC Quick Drying Stain Block can also be used as a primer on porous surfaces, new plaster, new wood and MDF skirtings window cills etc.
CHARACTERISTICS
- Water based,
- Quick drying,
- Seals problem stains,
- Low odour,
- Excellent adhesion,
- Suitable for a wide range of surfaces,
- Interior or exterior use.
- Surfaces must be clean, dry and free from any grease or wax,
- Remove any unsound paint before applying stain blocker,
- Stir well before use,
- Apply liberally and evenly with a synthetic brush or roller.
- One coat is recommended but a second coat can be applied if staining is severe.
- Dries in 30 minutes in well ventilated good drying conditions depending on temperature and humidity.
- Re-coat after 2 hours if necessary.
Please note: this product is non-returnable once purchased. Terms and conditions apply.
Brand: MGC
Model and Size: 20kg
Delivery Time: 2 - 3 working days
20kg Roofcoat FR10 is a one part moisture curing Elastomeric roof waterproofing compound which has exceptional adhesion to virtually any roofing material. It would provide instant waterproofing for leaking roofs. Roofcoat FR10 is an all-weather product and can be applied even when the surface i..
£274.97
£329.96 inc VAT
Brand: MGC
Model and Size: 310ml sealant
Delivery Time: 1-3 working days
Sempatap Thermal Sealant is a non-silicone based sealant that has been specifically designed for bonding seams and joints of Sempatap Thermal solid wall insulation rolls. Two tubes are needed per roll of Sempatap Thermal - Wallpaper.Please note: this product is non-returnable once purchase..
£55.89
£67.07 inc VAT
Brand: MGC
Model and Size: 5 inch
Delivery Time: 2 - 3 working days
5" Roofcoat FR10 Spreader is a specifically designed for applying Roofcoat FR 10.Please note: this product is non-returnable once purchased. Terms and conditions apply. ..
£16.22
£19.46 inc VAT
Brand: MGC
Model and Size: 5litre primer
Delivery Time: 2 - 3 working days
Sempatap "A" Primer is a water based primer for absorbent surfaces. Use for pre-treating highly absorbent surfaces, such as plaster, plaster boards, plywood, particle board, brick, concrete, cement screeds, wood, etc. prior to the installation of Sempatap and Sempafloor.APPLICATIONAll surfaces must ..
£38.35
£46.02 inc VAT
Brand: MGC
Model and Size: 5 Litre
Delivery Time: 2 - 3 working days
5 Litre Bactdet D 05 is a solution for cleaning and sterilising surface, which can be diluted 1:4 with warm water.Dilute solution 1:4 with warm water.Extend treatment one metre in all directions beyond all visible signs of infection. Wash down using a brush, cloth or sponge and change the ..
£110.00
£132.00 inc VAT
Brand: MGC
Model and Size: MGC Fungicidal Additive 50ml
Delivery Time: 2 - 3 working days
MGC Fungicidal Additive used for protecting the decoration from mould attack. It can be incorporated into emulsion paint, gloss paint, primers, undercoats, size, wallpaper paste and grout.InstructionsAdd one Fungicidal Additive to 2 litres of emulsion paint, wallpaper paste or size. Add one Fungicid..
£99.00 (£118.80 inc VAT)
£92.07