Kubala Stainless Steel Notched Trowel - 130mm x 270mm - Notch 8mm x 8mm

Kubala Stainless Steel Notched Trowel - 130mm x 270mm - Notch 8mm x 8mm is a specialised tool used in tiling and plastering with an ergonomic open handle for comfort. It has high quality stainless steel blade with notches for easy spreading of adhesive mortar.

CHARACTERISTICS

• A tool for spreading adhesive mortars
• 0.7mm thick stainless, acid-resistant steel
• Perfectly balanced trowel
• Profiled ergonomic handle made of PS material

How to use

• Hold the notched trowel at a slight angle (usually around 45 degrees) to the surface.
• Spread the adhesive evenly over a small area (about one square meter) using the flat side of the trowel.
• Flip the trowel over to the notched side.
• Press the notched edge into the adhesive, creating uniform ridges.
• The size of the notches determines the amount of adhesive applied.
• Place the tiles onto the adhesive, pressing them firmly into the ridges.
• Wiggle the tiles slightly to ensure good contact.