23mm Isocheck 23C Concrete Floor Acoustic Board - 2400mm x 600mm
Guide Price
23mm Isocheck 23C Concrete Floor Acoustic Board - 2400mm x 600mm
Guide Price: £44.03 (£52.84 inc VAT)
Price per m2: £30.58/m2 (£36.69 inc VAT)
- Product Code: A1-1039
- Delivery Time: 3 - 5 days
- Brand: Isomass (Tech. support: 08458383389)
- Model: 600mm x 2400mm - 1.44m2
- Weight: 18.80kg
Our ratings on 16-12-2024:
4.8 out of 5
23mm Isocheck 23C Concrete Floor Acoustic Board - 2400mm x 600mm
Width: 600mm
Length: 2400mm
Coverage: 1.44m2
Weight/m2: 13kg
23mm Isocheck 23C is an overlay platform system, designed for reducing sound transmission, including impact sound transmission and improving acoustic performance of concrete floors. Isocheck 23C is used new build, refurbishment and conversions of concrete floors, able to meet the requirements of the Building Regulations, Approved Document E 2003 (including the subsequent amendments in 2004 and 2010) but also in compliance with the Robust Detail. Isocheck 23C consists of a 18mm moisture resistant P5 V313 chipboard bonded to 5.5mm cross linked Isopoli.
CHARACTERISTICS
- Reduces impact sound transmission,
- Reduces airborne sound transmission,
- Able to meet values prescribed by the Approved Document E of the Building Regulations,
- Consists of a moisture-resistant P5 V313 chipboard and 5.5mm cross linked Isopoli,
- Robust Detail compliant;
- Can comply with Code for Sustainable Homes.
APPLICATION
- To be used over concrete floors for conversions, refurbishments or new build with a new ceiling
INSTALLATION
- Installation of isocheck should not commence until roof, window glazing and wet trades are completed and the structure is watertight.
- Floor should be a level screed / concrete with a smooth surface, or an in-situ concrete base. The floors should be level, sufficiently dry and swept clean
- Apply Isocheck Acoustic Angled Flanking Band on the edges of the Isocheck boards just before they are pushed against the perimeter walls to isolate the board from the wall.
- Board fitting should begin at the furthest point from the entrance and marked out so as not to finish with any panels less than 200mm wide.
- The decking must be laid in broken bond pattern, with all joints glued and staggered.
- No Mechanical fixings should be used.
- Isocheck adhesive is applied to both the top of the tongue and the bottom of the groove on each side of each joint.
- The boards are then pushed tightly together. Surplus adhesive should be wiped away from the surface with a damp cloth.
CERTIFICATION
- Complies with New Build Robust Detail descriptive FFT5 within E-FC-1, E-FC-2 and E-FS-1.
Isocheck-27C-23C-18C-14C-Installation_Instructions.pdf
Brand: Isomass
Model: 45mm x 45mm
Delivery Time: 3 - 5 days
45mm x 45mm Econocheck Shallow Batten 45 is part of a suspended concrete floor system, designed for reducing sound transmission and improving acoustic performance of level concrete floors. Isocheck Shallow Batten consists of a layer of 10mm ACF (Acoustic Chip Foam) bonded to a FSC-cer..
Brand: Isomass
Model: 1m x 15m - 15m2
Delivery Time: 3 - 5 days
1.6mm Isocheck Re-Mat LVT Resilient Floor Mat is an underlay mat to be fixed beneath luxury vinyl tile floor covering and similar finishes to reduce impact sound transmission through concrete and timber floors. This acoustic resilient mat is constructed from cork mixed with waste rubber from th..
£110.00
£132.00 inc VAT
Brand: Isomass
Model: 2400mm x 600mm - 1.44m2
Delivery Time: 3 - 5 days
32mm Monodeck 32T is an acoustic insulation overlay platform system bonded direct to floorboards, designed for soundproofing and improving acoustic performance of timber floors, whenever finished floor height is not critical. The system is used in new build, refurbishment and conversion applications..
Brand: Isomass
Model: 120x1250mm
Delivery Time: 3 - 5 days
120mm Isocheck Re-Mat Acoustic Isolation Strips are used to reduce structure borne noise when installed beneath block work walls, separating concrete floors from the walls. The strips are made from a rubber crumb, providing minimal creep and great structural stability. The strips are available in di..
Brand: Isomass
Model: 1.0m x 10m - 10m2
Delivery Time: 3 - 5 days
Isocheck Re-Cork 3 is an impact improvement underlay used for reducing sound transmission of concrete floors with carpet flooring finish. Re-Cork 3 is made of natural cork, hence it does not compact, it retains its insulating characteristics, does not absorb water, does not rot and resists cond..
Brand: Isomass
Model: 1200x600 - 0.72m2
Delivery Time: 3 - 5 days
Isocheck Isowave Cavity Barrier 33 is an acoustic plasterboard used for reducing excessive flanking sound transmission through underfloor and above ceiling cavities, the voids beneath and above the partition. Isocheck Acoustic Cavity Barrier consists of a single or double layer of 10mm semi-rig..
Related Products
Guide Price
Brand: Isomass
Model: 600x1200mm - 0.72m2
Delivery Time: 3 - 5 days
14mm Isocheck 14C is an overlay platform system, designed for reducing sound transmission, including impact sound transmission and improving acou..
Guide Price: £18.32
£21.98 inc VAT
Guide Price
Brand: Isomass
Model: 600x2400mm - 1.44m2
Delivery Time: 3 - 5 days
27mm Isocheck 27C is an overlay platform system, designed for reducing sound transmission, including impact sound transmission and improving acou..
Guide Price: £37.04
£44.45 inc VAT
Brand: Isomass
Model: 2400mm x 600mm - 1.44m2
Delivery Time: 3 - 5 days
18mm Isocheck 18C is an overlay platform system, designed for reducing sound transmission, including impact sound transmission and improving acou..