Ceresit ZU WHITE Polystyrene and Reinforced Mesh Adhesive - Base Coat Render
Ceresit ZU WHITE Polystyrene and Reinforced Mesh Adhesive - Base Coat Render
Price: £21.87 (£26.24 inc VAT)
Price per m2: £4.37/m2 (£5.25 inc VAT)
- Product Code: A1-2732
- Delivery Time: 1 - 2 days
- Brand: Ceresit
- Model: ZU White - 25kg
- Weight: 25.00kg
Our ratings on 16-12-2024:
4.8 out of 5
Ceresit ZU White Polystyrene and Reinforced Mesh Adhesive - Base Coat Render
Weight: 25kg
Ceresit ZU White Polystyrene and Reinforced Mesh Adhesive is a cement-based, polymer-modified adhesive specifically designed for fixing white or graphite expanded polystyrene (EPS) insulation boards to exterior walls. The EPS boards should meet the requirements of external thermal insulation composite systems (ETICS) according to British Standard EN 13163. Ceresit ZU provides an excellent bond between the insulation and the substrate, whether that is concrete, brickwork, or existing renders. It is also used to embed the reinforcing mesh layer over the insulation, creating a base coat render system. The adhesive is flexible enough to accommodate minor movements in the substrate.
CHARACTERISTICS
- White version
- Cement-based, polymer-modified adhesive
- Designed for fixing white or graphite expanded polystyrene (EPS) insulation boards
- EPS boards should meet requirements of EN 13163 for ETICS
- Provides excellent bond strength between insulation and substrate
- Suitable for concrete, brickwork, and existing render substrates
- Used to embed reinforcing mesh, creating a base coat render system
- Flexible to accommodate minor substrate movements
- Easy to apply
APPLICATIONS
- External walls
Application and installation of an external wall insulation system
Fixing polystyrene boards.
- Adhesive should be applied with a trowel around the perimeter of the board - band of 3-4cm wide and several blobs in the centre.
- Place the board to the wall and press it down with a long float. Properly applied mortar after pressing the board to the wall should cover min. 40% of its area.
- The boards should be fixed closely to each other in one plane, with the horizontal joints in different levels.
Installing the reinforced mesh.
- Add the adhesive with a 10 or 12mm notched trowel on the surface polystyrene boards.
- Press the mesh on the fresh mortar until it is no longer visible.
- Thin coat render can be made after approx. 24 hours from the application of the reinforcement layer.
Once purchased this product is non-returnable.
Please note that we can supply this product cheaper if you buy it with the whole external wall system from us. Contact us for more details.
Ceresit-ZU-datasheet.pdf
Brand: Ceresit
Model: 280ml
Delivery Time: In Stock 1-2 working days
Ceresit CS-38 is a one-component, high-temperature sealant resistant to direct contact with fire and temperature fluctuations up to +1,200 ° C, and for short periods even up to +1,500 ° C. It has very good adhesion to surfaces such as: concrete, cement mortars and plasters, bricks (also refractory),..
Guide Price
Brand: Ceresit
Model: CT174 - 25kg 2mm
Delivery Time: 5 - 7 days
2mm grain Ceresit CT174 Silicate-Silicone Render is a high-performance, exterior thin-layer decorative render. It is particularly recommended for use as a facade render within Ceresit ETICS (External Thermal Insulation Composite Systems), where it can be applied over EPS (Expanded Polystyrene) board..
Guide Price: £55.10
£66.12 inc VAT
Brand: Ceresit
Model: 1m x 25m - 25m2
Delivery Time: 2 - 3 working days
Ceresit CT 327 Glass-Fibre Mesh Roll is a reinforcing mesh for embedding into mortars for faades or pedestals exposed to higher stress or higher mechanical loads. It is a part of the Ceresit External Thermal Insulation Composite Systems (ETICS).CHARACTERISTICSAlkali-resistant, Slip proof, Tear proof..
Brand: Ceresit
Model: CT174 - 25kg
Delivery Time: 5 - 7 days
1.5mm grain Ceresit CT174 Silicate-Silicone Render is a high-performance, exterior thin-layer decorative render. It is particularly recommended for use as a facade render within Ceresit ETICS (External Thermal Insulation Composite Systems), where it can be applied over EPS (Expanded Polystyrene) boa..
£58.00
£69.60 inc VAT
Brand: Ceresit
Model: CT74 - 25kg
Delivery Time: 3 - 5 days
Silicone Render Ceresit CT74 - 1.5mm grain - Self Clean is a premium, silicone-modified, thin-layer exterior render with advanced self-cleaning properties. It is formulated to provide exceptional weather protection and a long-lasting, attractive finish for exterior walls. The silicone technolog..
£63.00
£75.60 inc VAT
Brand: Ceresit
Model: 25kg
Delivery Time: 5 - 7 days
Ceresit CT29 Smooth Mineral Exterior Filler and Skim Coat is a high-quality, cement-based exterior filler and skim coat designed for use on mineral-based substrates. It is particularly well-suited for smoothing and levelling uneven surfaces, such as concrete, masonry, and rendered walls, prior to th..
£27.56
£33.07 inc VAT