Ceresit CT80 Universal Adhesive for Mineral Wool EWI Slabs, Polystyrene and Phenolic Boards

Guide Price
Ceresit CT80 Universal Adhesive for Mineral Wool EWI Slabs, Polystyrene and Phenolic Boards
Guide Price: £15.20 (£18.24 inc VAT)
- Product Code: A1-2679
- Delivery Time: 7 - 10 days
- Brand: Ceresit
- Model and Size: CT80 - 25kg
- Weight: 25.00kg
Our ratings on 16-12-2024:

4.8 out of 5
Ceresit CT80 Adhesive for Mineral Wool EWI Slabs, Polystyrene and Phenolic Boards in Insulated Render Systems
Weight: 25kg
Fire Rating (Reaction to Fire): A2(Limited combustibility)
Ceresit CT80 is an adhesive mortar for fastening EWI mineral wool slabs, polystyrene and phenolic boards and also for making a thin layer of base coat render reinforced with fibreglass mesh on the insulation in Insulated Renders Systems. Ceresit CT80 has very good adhesion to load-bearing, dense and dry substrates such as surfaces of walls, plasters, mosaics and concretes.
CHARACTERISTICS
- Universal usage,
- Elasticised,
- Breathable,
- Durable,
- Excellent adhesion,
- Resistant to adverse weather conditions,
- Can be machine applied.
APPLICATION
- Ceresit CT80 adhesive is used both for fixing EPS, phenolic boards and mineral wool slabs,
- Fixing a protective reinforced layer for thermal insulation ,
- EWI in newly erected buildings as well as for thermal-renovation of existing buildings.
INSTALLATION
- Before starting work, check the adhesion of existing plasters and coatings. Dull sounding plasters must be removed. Defects and unevenness of the substrate should be levelled. The surface should be free from fats, bitumen, dust and other substances that reduce adhesion. Places with moss and algae should be cleaned and then saturated with a fungicide solution.
- To 5 litres of clean, cold water pour the contents of the package and mix using a mechanical mixer to a homogeneous mass without lumps, wait 5 minutes and stir again.
- Apply 3-4 cm band mortar with a trowel along the edges of the slab and a few blobs ~ 8 cm within the slab. Push the slab on to the wall and press it firmly. Properly applied mortar should cover min. 40% of its area, after pressing.
- You can also apply the mortar to even, smooth substrates using a toothed trowel (teeth 10-12 mm).
- The boards should be fixed tightly to one another, in one plane, with a zigzag vertical jointing.
- After CT80 mortar is bound - after about 3 days - the mineral wool slabs should be additionally fastened with mechanical fasteners.
Fixing a mesh reinforced layer
- Apply a primer on the mineral wool slabs.
- After the primer layer has dried - approx. 24 hours, apply Ceresit CT80 prepared mortar with 10 or 12 mm notched trowel on the surface of mineral wool boards.
- Apply a fibreglass mesh to the fresh mortar, then smooth the surface evenly so that the grid is no longer visible.
Brand: Ceresit
Model and Size: 25kg
Delivery Time: 3 - 5 days
Ceresit CT85 Flex is a versatile, cementitious adhesive and base coat designed for use with expanded polystyrene (EPS) boards in external thermal insulation composite systems (ETICS). Formulated to provide exceptional adhesion and flexibility, this product plays a crucial role in the Ceresit Cerethe..
£20.31
£24.37 inc VAT
Brand: Ceresit
Model and Size: 280ml
Delivery Time: In Stock 1-2 working days
Ceresit CS-7 is a one-component, flexible white sealant based on acrylic dispersion, used in filling and sealing joints, cracks and voids in all kinds of building materials. Ceresit CS 7 has high adhesion to any compact, porous and absorbent materials such as: aerated concrete, gypsum, sandstone, ch..
Brand: Ceresit
Model and Size: CT174 - 25kg 2mm
Delivery Time: 5 - 7 days
2mm grain Ceresit CT174 Silicate-Silicone Render is a high-performance, exterior thin-layer decorative render. It is particularly recommended for use as a facade render within Ceresit ETICS (External Thermal Insulation Composite Systems), where it can be applied over EPS (Expanded Polystyrene) board..
Guide Price: £55.10
£66.12 inc VAT
Brand: Ceresit
Model and Size: 870ml
Delivery Time: 1 - 2 days
Ceresit TS70 Mega is a high performance, one component low-pressure expanding polyurethane foam used for quick mounting of frames and for filling cavities, supplementing thermal and acoustic insulation. Ceresit TS 70 Mega foam is used for setting and sealing door and window frames, window sills, rol..
£9.80
£11.76 inc VAT
Brand: Ceresit
Model and Size: 0.5L
Delivery Time: In Stock 1-2 working days
Ceresit CT99 is a vapour-permeable and water-dilutable fungicide ready to use solution, which does not contain heavy metals, does not stain, can be painted, and can be used both indoors and outdoors. Ceresit CT99 can combat green blooms and mold fungi. It is used on concrete substrates, plasters, pa..
£16.00
£19.20 inc VAT
Brand: Ceresit
Model and Size: 25kg - 0.5 mm grain
Delivery Time: 1-3 working days
Ceresit CT60 is a ready-to-use, polymer-modified acrylic thin layer render for exterior wall applications. It features a BioProtect formula that provides enhanced resistance to the growth of mould, algae and fungus, ensuring a long-lasting, attractive finish. The acrylic-based formulation provides e..
Related Products
Brand: Various
Model and Size: 1200mm x 2400mm - 2.88m2
Delivery Time: 2 - 5 working days
32.5mm Thermal and Acoustic Wall Panel is a 20mm rigid high density thermal and acoustic Rockwool insulation slab bonded to 12.5mm fire resistant plas..
Brand: Various
Model and Size: 1200mm x 2400mm - 2.88m2
Delivery Time: 2 - 5 working days
42.5mm Thermal and Acoustic Wall Panel is a 30mm rigid high density thermal and acoustic Rockwool insulation slab bonded to 12.5mm fire resistant plas..
Brand: Various
Model and Size: 1200mm x 2400mm - 2.88m2
Delivery Time: 2 - 5 working days
52.5mm Thermal and Acoustic Wall Panel is a 40mm rigid high density thermal and acoustic Rockwool insulation slab bonded to 12.5mm fire resistant plas..
Brand: Various
Model and Size: 1200mm x 2400mm - 2.88m2
Delivery Time: 2 - 5 working days
62.5mm Thermal and Acoustic Wall Panel is a 50mm rigid high density thermal and acoustic Rockwool insulation slab bonded to 12.5mm fire resistant plas..
Brand: Various
Model and Size: 1200mm x 2400mm - 2.88m2
Delivery Time: 2 - 5 working days
32.5mm Acoustic and Thermal Wall Panel is a 20mm rigid high density thermal and acoustic Rockwool insulation slab bonded to 12.5mm soundproof plasterb..
Brand: Various
Model and Size: 1200mm x 2400mm - 2.88m2
Delivery Time: 2 - 5 working days
42.5mm Acoustic and Thermal Wall Panel is a 30mm rigid high density thermal and acoustic Rockwool insulation slab bonded to 12.5mm soundproof plasterb..
Brand: Various
Model and Size: 1200mm x 2400mm - 2.88m2
Delivery Time: 2 - 5 working days
52.5mm Acoustic and Thermal Wall Panel is a 40mm rigid high density thermal and acoustic Rockwool insulation slab bonded to 12.5mm soundproof plasterb..
Brand: Various
Model and Size: 1200mm x 2400mm - 2.88m2
Delivery Time: 2 - 5 working days
62.5mm Acoustic and Thermal Wall Panel is a 50mm rigid high density thermal and acoustic Rockwool insulation slab bonded to 12.5mm soundproof plasterb..