8mm Isocheck ResiScreed 8 - Under Screed Impact Improvement Mat - 1m x 15m Roll
8mm Isocheck ResiScreed 8 - Under Screed Impact Improvement Mat - 1m x 15m Roll
- Product Code: A1-5220
- Delivery Time: 3 - 5 days
- Brand: Isomass (Tech. support: 08458383389)
- Model: 1m x 15m - 15m2
- Weight: 43.80kg
Our ratings on 16-12-2024:
4.8 out of 5
8mm Isocheck ResiScreed 8 - Under Screed Impact Improvement Mat - 1m x 15m Roll
Length: 15000mm
Width: 1000mm
Thickness: 8mm
Mat Coverage: 15m2
Density: 365kg/m3
Weight/m2: 2.92kg
Weight: 43.8kg
8mm Isocheck ResiScreed 8 is an under screed mat made from rubber crumb bonded to a DPM fibreglass backing to reduce the impact sound transmission through concrete floors. It is designed to be placed directly beneath the screed to isolate the screed from the structural sub floor.
CHARACTERISTICS- A recycled eco friendly mat made from rubber crumb bonded to a DPM fibreglass backing
- Excellent impact sound insulation properties,
- Impact improvement up to 25dB,
- Isolate the screed from the structural sub floor,
- Can be used on existing floors for new build, refurbishments, conversions.
APPLICATION
- To be used on concrete beam and block, hollow core, in-situ and all other types of concrete structural subfloors, for conversions or new build.
INSTALLATION
- The floor surface should be swept free of any loose debris,
- Butt joint and seal all roll edges of isocheck ResiScreed,
- At perimeters overlap ResiScreed onto a right angle flanking edge strip which should be turned up all vertical surfaces to allow a minimum 50mm to protrude above the intended FFL of the screed,
- Perimeter overlaps or butt joints should be sealed with a min 100mm wide Isocheck jointing tape.
Brand: Isomass
Model: 40mm - 13mm
Delivery Time: 2 - 3 working days
40mm Isocheck Isolation Washers used to isolate and separate mechanical fixings from the surrounding structure and reduce the transfer of noise and vibration.Diameter A = 40mmDiameter screw B = 13mm..
Brand: Isomass
Model: 310ml
Delivery Time: 1 - 2 days
310ml Isomass Isocheck Intumescent Acoustic FR Sealant is a sealing and fire stopping product intended for penetration services and linear joint and gap seals. Isocheck acoustic fire rated sealant is used to reduce the unwanted airborne sound that is commonly found to pass around the junct..
Brand: Isomass
Model: 50mm x 10mm x 10m - Free Delivery
Delivery Time: 1 - 2 days
50mm x 10mm x 10m Isocheck Acoustic Isolation Strip is utilised to improve acoustic insulation and reduce impact sound transmission in masonry, steel, and timber partition and separating walls. These strips are crafted from cross-linked Isopoli foam and feature an adhesive backing, ensuring the..
£33.92
£40.70 inc VAT
Brand: Isomass
Model: 2400mm x 600mm - 1.44m2
Delivery Time: 3 - 5 days
18mm Isocheck 18T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic performance of traditional timber joisted floors. Isocheck 18T is used in new build, refurbishment and conversion applications, able to also reduce impact sou..
Brand: Isomass
Model: 6/12 - 10mm - 4m Free Delivery
Delivery Time: 1 - 2 days
10mm Isocheck Expandastrip 6/12 is a permanently elastic open cell Polyurethane foam, used as a seal in joints between pre-cast units, sealing around doors and window frames, or between corrugated roofing panels, roof structures and roof lights ventilation and air conditioning ductwork. It is impreg..
Brand: Isomass
Model: 1litre
Delivery Time: 1 - 2 days
For use with both Isocheck and Econocheck tongued & grooved board joints.As a rule of thumb a 1 litre bottle (as illustrated) should cover approx 20m2 depending on the board size, ensuring glue is always applied to the top and bottom of the t&g joint. ..
£8.89
£10.67 inc VAT