40mm STEICO Safe - Sarking and Sheathing Board with Integrated Membrane - 1880mm x 600mm - Pallet of 56
40mm STEICO Safe - Sarking and Sheathing Board with Integrated Membrane - 1880mm x 600mm - Pallet of 56
- Product Code: A1-7002
- Delivery Time: 2 - 4 weeks
- Brand: Steico
- Model: 1880mm x 600mm - 63.28m2
- Weight: 531.55kg
Our ratings on 08-11-2024:
4.8 out of 5
40mm STEICO Safe - Sarking & Sheathing Board with Integrated Membrane - 1880mm x 600mm - Pallet of 56
Length: 1880mm
Width: 600mm
Thickness: 40mm
Single Coverage: 1.13m2
Pallet coverage: 63.28m2
Density: 210kg/m3
Weight/m2: 8.4kg
Weight: 531.55kg
Thermal Conductivity: 0.043W/mK
R-Value: 0.9m2K/W
Compressive Strength: 200kPa
Fire Rating (Reaction to Fire): E
40mm STEICO Safe is a multi-functional, rigid wood-fibre insulation board designed for roofs with increased rain protection requirements. It is the only board in the range that can be used on low-pitch roofs (as low as 5°) without the need for an additional full-surface roofing felt or membrane, thanks to its factory-laminated, vapour-permeable top layer. STEICO Safe is essentially the high-spec version of the Universal board. While most boards rely on their natural density and paraffin treatment to shed water, STEICO Safe goes a step further by including an integrated, factory-applied waterproof membrane. This makes it the specialist choice for high-exposure areas and very shallow-pitched roofs.
CHARCTERISTICS
- Each board comes with a pre-laminated, 3-ply functional membrane. This membrane includes a self-adhesive overlap, allowing for a primary water-shedding layer to be created as the boards are laid.
- Designed specifically for roof pitches between 5° and 15°, where standard wood-fibre boards would typically require a separate secondary membrane.
- Because of the integrated membrane, STEICO Safe can remain exposed as a temporary roof covering for up to 8 weeks—double the exposure time of the standard Universal board.
- Manufactured using the "Dry Process," it provides exceptional thermal performance.
- Acts as the insulation layer, the wind-tight layer, and the primary secondary-drainage layer in a single installation step.
APPLICATION
- Low-Pitch Roofs: For modern, shallow-pitched roof designs where water run-off is slower and the risk of ingress is higher.
- Behind Brickwork Facades: Often used as a high-performance sheathing board behind masonry or brick-tie systems to provide a robust, insulated, and wind-tight "back-stop."
- High-Exposure Sites: Recommended for buildings in coastal or mountainous regions where extreme driving rain is expected.
CERTIFICATIONS
Steico_Safe_Technical_Data_Sheet.pdf
Brand: Steico
Model: 180mm x 40m roll
Delivery Time: 2 - 4 weeks
STEICOmulti Tape P is a robust, single-sided adhesive tape with a special kraft paper carrier. It is specifically designed for the permanent and airtight sealing of membrane overlaps and board joints within the internal building envelope. STEICOmulti tape P is the standard high-performance adhesive ..
Brand: Steico
Model: 1190mm x 575mm - 13.60m2
Delivery Time: 2 - 4 weeks
240mm STEICOflex 036 is a flexible, high‑performance wood‑fibre insulation slab designed for exceptional thermal comfort, acoustic absorption and healthy building performance. Made from sustainably sourced wood and certified to rigorous European standards, it offers one of the best thermal conductiv..
Brand: Steico
Model: 2230mm x 600mm - 29.48m2
Delivery Time: 2 - 4 weeks
100mm STEICO Special Dry is a multi-purpose, rigid wood-fibre insulation board manufactured using the modern Dry Process. It is designed to be installed on top of rafters (sarking) or on the outside of timber frame studs (sheathing). Because it is produced in a dry process, it can be manufactur..
Brand: Steico
Model: 1200mm x 380mm - 0.46m2
Delivery Time: 2 - 4 days
100mm STEICOtherm Internal Wet is an ecological, vapour-open insulation board designed for applications where moisture management and thermal mass are critical. The Square Edge (SE) profile makes it particularly suitable for internal wall insulation (IWI) and floor systems where a tight, flush fit i..
Brand: Steico
Model: 1880mm x 600mm - 1.13m2
Delivery Time: 2 - 4 days
22mm STEICO Universal Wet Wood-Fibre Insulation Board - Sarking and Sheathing Board - 1880mm x 600mm
22mm STEICO Universal Wet is a high-density, rigid wood-fibre insulation board designed for both roof and wall applications. Manufactured using the traditional Wet Process, it relies on the wood’s natural lignin to bond the fibres together, creating a robust, vapour-open board that is exceptionally ..
Brand: Steico
Model: 1880mm x 600mm - 15.82m2
Delivery Time: 2 - 4 weeks
160mm STEICO Special Dry is a multi-purpose, rigid wood-fibre insulation board manufactured using the modern Dry Process. It is designed to be installed on top of rafters (sarking) or on the outside of timber frame studs (sheathing). Because it is produced in a dry process, it can be manufactur..