All Products

45mm x 45mm Econocheck Shallow Batten 45 is part of a suspended concrete floor system, designed for reducing sound transmission and improving acoustic performance of level concrete floors. Isocheck Shallow Batten consists of a layer of 10mm ACF (Acoustic Chip Foam) bonded to a FSC-cer..

15 kg Regupol Regubond 100 is a solvent free, water-borne synthetic polymer based adhesive offered as a bucket of a ready to use blue paste. It sets rapidly to a rigid and cohesive final film, which gives the floor coverings a very good dimensional stability. Regupol Regubong 100 is specially formul..

90mm Knauf Earthwool FrameTherm Roll is a lightweight, flexible, resilient and non-combustible glass mineral wool quilt, used for friction fitting between timber studs and rafters. The rolls are 1140mm wide and ready cut to produce 3 rolls in 380mm widths. It is specifically designed for friction fi..

DuPont AirGuard Reflective is an air and vapour control layer that is 100% air tight. It has a metallised surface with a very low emissivity internal vapour barrier that can enhance thermal comfort by reflecting up to 95% of radiant heat back into the building. It is usually installed with an air ga..

Easy-Trim Master 112GSM Breather Membrane is an air tight, vapour permeable, lightweight breather membrane for fully supported and unsupported installations in pitched roofs. It is a high performance breather membrane, consists of 3 layers to achieve a high vapour permeability, superior water resist..

Kreisel Poztynk 560 a ready made cement-lime traditional mortar for internal and external render that can be applied to all mineral substrates. It is resistant to water, so can be used in very humid rooms, in bathrooms or basements. It is easy to use, has good adhesion and highly durable. Created fr..

25kg Traditional Sand And Cement Packed Render Atlas is a ready made traditional cement render for internal and external use that can be applied to all mineral substrates. It is made from a combination of Portland cement, hydrated lime, quartz aggregate and refining agents. It is easy..

6.5mm Isocheck Impact Mat 100 is made from recycled rubber and designed to reduce sound transmission through timber floors and staircases. It has give an excellent impact improvement and has dynamic stiffness - structural memory. It is ideal for floor upgrades to improve sound reduction on stairs an..

Cellecta HexaTex is a high performance thermal improvement membrane suitable for use on inverted roofs finished with gravel ballast, and concrete pavers on appropriate supports. Dramatically minimises the cooling effect associated with rainwater flowing down through the insulation and draining away...

Everbuild Weatherproof PVA Adhesive is a Weatherproof PVA Adhesive Bond, highly effective building adhesive and helps seal joints between acoustic insulation, plasterboard, flooring. It removs the potential for sound or warm air to pass between the layers of material. A 1 litre bottle of PVA Adhesiv..

Visqueen Fully Bonded Vapour Barrier is a tough multi layer reinforced HDPE membrane with an aluminium foil on one side and an adhesive side. It is used to reduce interstitial condensation from within the structure and to improve airtightness of the building. It restricts the passage of warm, moist ..

25kg Mapei Adesilex P9 Tile Adhesive - White is a high performance polymer modified enhanced cementitious tile adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. Adesilex P9 is composed of cement, fine-aggregates, synthetic resins and special additives with ..

Icopal Extra Strength Top Coat Bitumen Roofing Felt is an extra strength top coat roofing felt, made of heat-hardened polyester and thicker waterproofing on both sides for roofs and foundations. A latest generation, patented, specialised roofing felt for flat roofs. Due to the shorter heating time b..

75mm Actis Hybris Panel is a multi-foil insulation featuring a unique and flexible honeycomb structure that combines insulation, air tightness, moisture resistance and reflective properties. The low-emmissivity honeycomb structure is protected from excessive dust and air movements. Actis Hybris..

Icopal Roofing Felt Underlay 3mm Hydrobit V60 S30 Bitumen - Torch On is an extra strength base bitumen roofing felt, made of glass fleece reinforcement, coated with SBS modified bitumen blend with mineral filler, top side is finished with sand, bottom side is finished with foil. A latest generation,..

Kreisel Poztynk 560 a ready made cement-lime traditional mortar for internal and external render that can be applied to all mineral substrates. It is resistant to water, so can be used in very humid rooms, in bathrooms or basements. It is easy to use, has good adhesion and highly durable. Created fr..

25kg Traditional Sand And Cement Packed Render Atlas is a ready made traditional cement render for internal and external use that can be applied to all mineral substrates. It is made from a combination of Portland cement, hydrated lime, quartz aggregate and refining agents. It is easy..

10mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape. Galvanised steel EN 10346 DX51D Z275.InstallationUse appropriate fixings.Always ensure that compa..

12mm Galvanised Movement Mesh Beads are used to overcome movement tolerances in plaster and render finishes minimising racking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. 3m length. Galvanised steel EN 10346 DX51D Z..

13mm Galvanised Steel Architrave Feature Bead - Abutting is for use on traditional wet 2 or 3 coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall finishes...

13mm Galvanised Steel Architrave Feature Bead - Engaging is for use on traditional wet 2 or 3 coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall finishes...

15mm Galvanised Steel Drywall Feature Bead - Abutting is for use on thin coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall finishes. Made of galvanised s..

15mm Monodeck Mat 15 is a tri-layer underlay mat with an 8mm ACF foam core designed to reduce airborne and impact sound transmission through timber floors. The reconstituted 8mm ACF foam core will provide impact and airborne improvement. Monodeck Mat 15 is ideal for floor upgrades, for improving sou..

16mm Stainless Steel Movement Mesh Beads are used to overcome movement tolerances in plaster and render finishes minimising racking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. 3m length.InstallationUse appropriate f..

Visqueen Gas Membrane Blue is a 400 gsm multi-layer reinforced polyethylene membrane for the protection of buildings against methane, radon, stythe, carbon dioxide and on NHBC amber 2 site conditions. This blue coloured membrane is flexible and easy to install. It is blue coloured on the front and ..

20mm Galvanised Steel Drywall Feature Bead - Engaging is for use on thin coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall finishes. Made of galvanised s..